Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware,I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy S4 Active Mini GT-I8580 users can now update their device with the latest XXUANB1 Android 4.2.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I8580XXUANB1. However, the firmware is currently out for Russia. Hope the firmware will hit other part of the world soon. The device recently released with Android 4.2.2 Jelly Bean and already get firmware update. Here we have the latest available official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware
As the Galaxy S4 Active Mini I8580 already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Active Mini I8580 to the latest XXUANB1 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUANB1 firmware on your Galaxy S4 Active Mini I8580 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S4 Active Mini GT-I8580 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean I8580XXUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Active Mini GT-I8580 model.

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I8580XXUANB1 official firmware on Galaxy S4 Active Mini I8580.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Active Mini I8580 through Odin:

Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 XXUANB1 Firmware for Galaxy S4 Active Mini I8580 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy S4 Active Mini I8580 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 Active Mini I8580 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8580XXDLJ5_I8580ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
That’s all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Active Mini GT-I8580. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Active Mini should now running on the latest Android 4.2.2 Jelly Bean build version XXUANB1. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.

No comments:

Post a Comment

Hello All Lovely User i am Here Any Kind Solution Need Just Comment Me i Try to Solved Of Your Problem Early Tnx To Visit My Blog

All Gsm Solution Headline Animator

Followers

Google+ Followers

Google+ Badge