Hi U Need Symphony W15 Official Flash File See
This File 100% Tested I hope Solved Ur
All Problem
Symphony W12 OFFICIAL FLASH FILE
Hi U Need Symphony W12 Official Flash File See
This File 100% Tested I hope Solved Ur
All Problem
Samsung N7100 Galaxy Note II - Discussion Thread - Last Official firmware
Samsung Galaxy Note II
The Samsung Galaxy Note II is an Android smartphone manufactured by Samsung and noted for its combination of a large display, 5.55-inch (141 mm) measured diagonally, and software optimized for an integral self-storing stylus. Because the display places the device at the large end of the smartphone and small end of the tablet size ranges, the Galaxy Note II has been called a hybrid of a phone and tablet, or phablet.
Succeeding the Samsung Galaxy Note, the Note II features a 1.6 GHz quad-core processor, 720p resolution display, 2 GB of RAM, and storage capacity up to 128 GB — when using a 64 GB microSD card with the projected 64 GB model.
At the time of its launch, the Galaxy Note II was the first Samsung phone to employ Android 4.1 Jelly Bean as its standard operating system.
Feature and Configuration
N7100XXDMB2_VFG - XX personalization Italy
Samfiles
Samsung Galaxy Note II (GT-N7100) –User Manual/Guide
Samsung Galaxy Note II (GT-N7100) –User Manual/Guide
Samsung Galaxy Note II Repair Manual
Samsung Galaxy Note 10.1 Repair Manual - iFixit
The Samsung Galaxy Note II is an Android smartphone manufactured by Samsung and noted for its combination of a large display, 5.55-inch (141 mm) measured diagonally, and software optimized for an integral self-storing stylus. Because the display places the device at the large end of the smartphone and small end of the tablet size ranges, the Galaxy Note II has been called a hybrid of a phone and tablet, or phablet.
Succeeding the Samsung Galaxy Note, the Note II features a 1.6 GHz quad-core processor, 720p resolution display, 2 GB of RAM, and storage capacity up to 128 GB — when using a 64 GB microSD card with the projected 64 GB model.
At the time of its launch, the Galaxy Note II was the first Samsung phone to employ Android 4.1 Jelly Bean as its standard operating system.
Feature and Configuration
N7100XXDMB2_VFG - XX personalization Italy
Samfiles
Samsung Galaxy Note II (GT-N7100) –User Manual/Guide
Samsung Galaxy Note II (GT-N7100) –User Manual/Guide
Samsung Galaxy Note II Repair Manual
Samsung Galaxy Note 10.1 Repair Manual - iFixit
Samsung to sell the Galaxy S IV in 6 variants
Samsung is ready to dump
the GT-I9505 (Galaxy S IV LTE) into a mockup version of the Galaxy S IV
specially for retailers. Samsung wants to use one device with LTE and 3G
on it which could hint to the use of the Snapdragon 600 processor in
the Galaxy S IV, another possibility is the use of Exynos processor with
a separate LTE chip. Sadly, our insider told us that Samsung is mostly
sure to use Snapdragon instead of Exynos.
The new Galaxy S IV comes in 2 colors in the first place, White and black. Samsung wants to sell the Galaxy S IV in 6 variants.
GT-I9500 Galaxy S IV 16 GB (White)
GT-I9500 Galaxy S IV 32 GB (White)
GT-I9500 Galaxy S IV 64 GB (White)
GT-I9500 Galaxy S IV 16 GB (Black)
GT-I9500 Galaxy S IV 32 GB (Black)
GT-I9500 Galaxy S IV 64 GB (Black)
Of course storage is never a problem in Samsung devices since they have MicroSD exapansion support and we do expect a MicroSD slot in the Galaxy S IV which simply means you can upgrade the storage of your Galaxy S IV with up to 64GB.
Samsung is expected to introduce the Galaxy S IV on March 14th in New York City.
The new Galaxy S IV comes in 2 colors in the first place, White and black. Samsung wants to sell the Galaxy S IV in 6 variants.
GT-I9500 Galaxy S IV 16 GB (White)
GT-I9500 Galaxy S IV 32 GB (White)
GT-I9500 Galaxy S IV 64 GB (White)
GT-I9500 Galaxy S IV 16 GB (Black)
GT-I9500 Galaxy S IV 32 GB (Black)
GT-I9500 Galaxy S IV 64 GB (Black)
Of course storage is never a problem in Samsung devices since they have MicroSD exapansion support and we do expect a MicroSD slot in the Galaxy S IV which simply means you can upgrade the storage of your Galaxy S IV with up to 64GB.
Samsung is expected to introduce the Galaxy S IV on March 14th in New York City.
How to root Samsung Galaxy Mega 5.8 and install CWM Touch Recovery
How to root Samsung Galaxy Mega 5.8 and install CWM Touch Recovery
Prerequisite:
1. Make sure your mobile should have 70 to 80% battery.
2. Enable USB debugging mode (Menu (app drawer) > Settings > Manage Applications > Development > USB Debugging – check box).
3. Ensure that you have backed up your all important data.
Requirements:
1. Download and install Samsung Galaxy S3 USB Drivers (Download USB drivers or download Samsung Kies (drivers included))
2. Download “Odin“.
3. Download “CWM Touch Recovery“.
4. Download “SuperSu“.
5. Download “Stock Recovery”
install CWM Touch Recovery :
1. Download all files on your computer .
2. Extract “Odin.zip” on the desktop and place “CWM Touch Recovery for Samsung Galaxy Mega 5.8” in it.
3. Now boot your phone into Download Mode
4. Open “Odin.exe” (from extracted folder) and connect your phone via USB cable to your computer in download mode. If your phone is connected successfully the one of the ID:COM boxes will turn yellow/green.
5. Click on “PDA” button and select file “.tar.md5” (from extracted folder).
6. Now, click on the Start button on Odin to start the installation process.
7. when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your phone from computer.
((Finish You have successfully installed CWM Touch Recovery))
(Note: If in case CWM Recovery doesn’t work for your device then you can flash “Stock Recovery” via above method only, just by replacing “PDA” file.)
Prerequisite:
1. Make sure your mobile should have 70 to 80% battery.
2. Enable USB debugging mode (Menu (app drawer) > Settings > Manage Applications > Development > USB Debugging – check box).
3. Ensure that you have backed up your all important data.
Requirements:
1. Download and install Samsung Galaxy S3 USB Drivers (Download USB drivers or download Samsung Kies (drivers included))
2. Download “Odin“.
3. Download “CWM Touch Recovery“.
4. Download “SuperSu“.
5. Download “Stock Recovery”
install CWM Touch Recovery :
1. Download all files on your computer .
2. Extract “Odin.zip” on the desktop and place “CWM Touch Recovery for Samsung Galaxy Mega 5.8” in it.
3. Now boot your phone into Download Mode
4. Open “Odin.exe” (from extracted folder) and connect your phone via USB cable to your computer in download mode. If your phone is connected successfully the one of the ID:COM boxes will turn yellow/green.
5. Click on “PDA” button and select file “.tar.md5” (from extracted folder).
6. Now, click on the Start button on Odin to start the installation process.
7. when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your phone from computer.
((Finish You have successfully installed CWM Touch Recovery))
(Note: If in case CWM Recovery doesn’t work for your device then you can flash “Stock Recovery” via above method only, just by replacing “PDA” file.)
-------------------------------------------------------------------------
root :8. Place “SuperSU” file in external/internal memory of your device.
9. Now, boot in to recovery mode by pressing and holding “Volume Up + Home Button + Power Button“.
10. In recovery menu, choose “install zip from SD card” > Give a path to “SuperSu” file from an internal/external SD card > Give “Yes” to confirm to root Samsung Galaxy Mega 5.8.
11. When the installation process is completed select “++++Go Back++++” and then choose “reboot system” to reboot your phone.
FINISH now your phone is ROOTED
Samsung Galaxy Star S5282 hard reset
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buttons "wipe data/factory reset" and select it with home button
4.Choose "yes" with volume buttons and select it with home button
5.Wait untiil format is complete
6.Select "reboot"
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buttons "wipe data/factory reset" and select it with home button
4.Choose "yes" with volume buttons and select it with home button
5.Wait untiil format is complete
6.Select "reboot"
!00% Tested
Sony Ericsson W8 E16i Hard Reset
Reset only applications:
In the Menu go to Settings > Privacy. Tap Settings reset to reset your applications without changing your data or accounts.
OR Reset all data:
Tap Factory Data reset > Reset phone > Erase everything to RESET all data, Google accounts and all downloaded apps.
or
If nothing works: As last resort do a Sony Ericsson Walkman W8 phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR
In the Menu go to Settings > Privacy. Tap Settings reset to reset your applications without changing your data or accounts.
OR Reset all data:
Tap Factory Data reset > Reset phone > Erase everything to RESET all data, Google accounts and all downloaded apps.
or
If nothing works: As last resort do a Sony Ericsson Walkman W8 phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR
Octopus Box Samsung v1.3.2 - i527, i537 and more
Octoplus/Octopus Box Samsung Software v1.3.2 is out!
Added support for:
Samsung SM-C101, SGH-I527 and SGH-I537!
Octoplus/Octopus Box Samsung Software v1.3.2 Release Notes
- Added support for the following models:
- SM-C101 - added Unlock, Write Firmware, Repair IMEI.
- SGH-I527 - added Direct Unlock, Write Firmware, Repair IMEI, Read/Write/Repair NVM,
- SGH-I527 - Read/Write Security, Read/Write EFS, Read PIT,
- SGH-I527 - Reboot in Download/Recovery Mode (all in Test Mode).
- SGH-I537 - added Direct Unlock, Write Firmware, Repair IMEI, Read/Write/Repair NVM,
- SGH-I537 - Read/Write Security, Read/Write EFS, Read PIT, Reboot in Download/Recovery Mode.
- Released some improvements to the main software.
- Added manuals for supported phones.
Dear users, as you've already might noticed, Octopus and Octoplus software are compatible with each other.
Thus, we've decided to merge Octopus and Octoplus LG/Samsung programs in order to reduce the number of
software and avoid any misunderstandings in the future. Owners of mentioned above boxes should use the
same installer. Also all Octopus Box owners can use Octoplus Shell software with all its servicing features.
Octoplus/Octopus Box Samsung products keep on proving that there are always remarkable solutions for your work!
Download Octoplus/Octopus Box Samsung Software v1.3.2
Good Luck
China Samsung i9300 galaxy s3 china spd6530 imei change sucessifull report!!!
Samsung China Samsung i9300 spd6530 imei change sucessifull report!!!
After some issues i made some changes on procedure, this not work for me on win7...
1-Use winxp
2-open VolcanoBox.
3-Go to Detect Tab.
4-Select SPD D+ D-anyka from list.
5-Attach phone
6-Click on detect button
7-detect spd Pinout
8-after detection make sure u will remenber GND, D+, D- pinout or take a screen shot to remneber u...
9-Close program, remove usb cable from box, remove 26pin multi cable front box(but leave leave it on phone).
10-Atach usb cable on volcano box without 26pin cable, open program.
11-Go to detect table, choose spd/anyka D+ D- cable, put manualy GND, D+, D- as before detected, click set pinout.
12-Go to Spd Tab select 13-6530 boot.
13-untick auto-detect pinout
14-R/W imei chooses COM
15-Press these keys from your keyboard to enable Imei repair Function ALT + CTRL + i
16-Click on Write Imei
17-Click RUN
18-New windows will be open
19-choose USB port
20-Write imei number in Boxes
21-Click on write imei
22-Connect 26pin cable on front box,
1-Use winxp
2-open VolcanoBox.
3-Go to Detect Tab.
4-Select SPD D+ D-anyka from list.
5-Attach phone
6-Click on detect button
7-detect spd Pinout
8-after detection make sure u will remenber GND, D+, D- pinout or take a screen shot to remneber u...
9-Close program, remove usb cable from box, remove 26pin multi cable front box(but leave leave it on phone).
10-Atach usb cable on volcano box without 26pin cable, open program.
11-Go to detect table, choose spd/anyka D+ D- cable, put manualy GND, D+, D- as before detected, click set pinout.
12-Go to Spd Tab select 13-6530 boot.
13-untick auto-detect pinout
14-R/W imei chooses COM
15-Press these keys from your keyboard to enable Imei repair Function ALT + CTRL + i
16-Click on Write Imei
17-Click RUN
18-New windows will be open
19-choose USB port
20-Write imei number in Boxes
21-Click on write imei
22-Connect 26pin cable on front box,
Subscribe to:
Posts (Atom)
