Samsung Galaxy I9205 Mega 6.3 JB Firmware How to Install I9205XXUCML8 4.2.2 Update Guide

Samsung Galaxy I9205 Mega 6.3 JB Firmware How to Install I9205XXUCML8 4.2.2 Update Guide,Samsung Galaxy Mega 6.3 GT-I9205 (LTE Variant) recently received the I9205XXUCML8 4.2.2 Jelly Bean firmware update. Samsung recently started rolling out an OTA update about the firmware. However, the firmware is currently released only for Germany (T-Mobile). Hope the firmware will hit other part of the world soon. Galaxy Mega 6.3 I9205 was released with  Android 4.2.2 Jelly Bean and yet to received any further android version. Till now, the Galaxy Mega 6.3 LTE I9205 received many regular firmware update by Samsung and here we have the latest XXUCML8 Jelly Bean 4.2.2 Firmware. If you own the device and  yet to update your device to this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the latest I9205XXUCML8 4.2.2 Jelly Bean firmware manually through Odin.
Samsung Galaxy I9205 Mega 6.3 JB Firmware How to Install I9205XXUCML8 4.2.2 Update Guide As the Galaxy Mega 6.3 LTE was released with Android 4.2.2 Jelly Bean and not yet received Android 4.3 Jelly Bean or later version Android version, you can only expect few bug fixes and performance enhancement with this latest firmware update.
So, want to update your Galaxy Mega 6.3 LTE I9205 to the latest XXUCML8 Android 4.2.2 Jelly Bean firmware? For official process, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUCML8 firmware on your Galaxy Mega 6.3 LTE I9205 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Mega 6.3 LTE GT-I9205 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean I9205XXUCML8 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Mega 6.3 LTE GT-I9205 model.
Germany (T-Mobile): I9205XXUCML8_I9205DTMCML1_DTM.zip

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I9205XXUCML8 official firmware on Galaxy Mega 6.3 LTE I9205.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Mega 6.3 LTE I9205 through Odin:

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.
  1. Download Android 4.2.2 XXUCML8 Firmware for Galaxy Mega 6.3 LTE I9205 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Mega 6.3 LTE I9205 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Mega 6.3 LTE I9205 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9205XXDLJ5_I9205ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
So, you just completed the tutorial to update Android 4.2.2 Jelly Bean official firmware on Galaxy Mega 6.3 LTE GT-I9205. Hope you successfully completed the update process. If you followed everything as mentioned in the above above tutorial, then your Galaxy Mega 6.3 LTE should now running on the latest Android 4.2.2 Jelly Bean build version XXUCML8. You can confirm the firmware update from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.

No comments:

Post a Comment

Hello All Lovely User i am Here Any Kind Solution Need Just Comment Me i Try to Solved Of Your Problem Early Tnx To Visit My Blog

All Gsm Solution Headline Animator

Followers

Google+ Followers

Google+ Badge