How to Install Samsung Galaxy S4 E300K 4.3 Jelly Bean Firmware E300KKKUENA2 Firmware Update Guide

How to Install Samsung Galaxy S4 E300K 4.3 Jelly Bean Firmware E300KKKUENA2 Firmware Update Guide,Samsung Galaxy S4 SHV-E300K (Korean Variant) recently received the E300KKKUENA2 Android 4.3 Jelly Bean official firmware update. Samsung recently started rolling out an OTA update about the firmware. The Galaxy S4 E300K was released with Android 4.2.2 Jelly Bean and started receiving Android 4.3 Jelly Bean from the month of October. Here is the latest KKUENA2 firmware for the device. If you yet to update your device then you can now update the same using our simple tutorial below. The below guide will help you to Download and install the E300KKKUENA2 4.3 Jelly Bean firmware manually through Odin. You can check  latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
Samsung Galaxy S4 official firmware
If your Galaxy S4 E300K already running on the Android 4.3 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 E300K to the latest KKUENA2 Android 4.3 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 KKUENA2 firmware on your Galaxy S4 E300K through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S4 SHV-E300K model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean E300KKKUENA2 Official Firmware Download List

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 E300KKKUENA2 official firmware on Galaxy S4 E300K.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 E300K through Odin:

How to Install Samsung Galaxy S4 E300K 4.3 Jelly Bean Firmware E300KKKUENA2 Firmware Update Guide
  1. Download Android 4.3 KKUENA2 Firmware for Galaxy S4 E300K from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy S4 E300K into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 E300K to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: E300KXXDLJ5_E300KODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congratulations! your Galaxy S4 E300K is now updated to the latest and official Android 4.3 Jelly Bean firmware. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your your Galaxy S4 should now running on the latest Android 4.3 Jelly Bean build version KKUENA2. You can confirm the firmware update details from Settings-About Phone. If you find any problem with the above tutorial and download link,  feel free to contact with us using the comment form below..

No comments:

Post a Comment

Hello All Lovely User i am Here Any Kind Solution Need Just Comment Me i Try to Solved Of Your Problem Early Tnx To Visit My Blog

All Gsm Solution Headline Animator

Followers