NCK Dongle Generic MTK Flash Tool v1.20 Update Released - 02/05/2013

Added

Alcatel:

OT-217 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-217d Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-228 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-232 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-233 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-292 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-297 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-510/OT-510a Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.
OT-870 Write Flash/Change Language/Unlock Via Flashing/Format/Read info meta operations.


Telenor:

Telenor PRO239L Unlock/Repair IMEI/Meta Operations.


General

brom updated to 5.1224.00, meta.dll updated to 6.1224.00
Added new flashing method, select from setting (new flash method).
If first method fail user can try second method, it s recommended for SF flashes.

Added debugging log, this allow to catch easy errors in flashing.
Some other fixes also.

Official Download Link:

Index of /Installers


Official Website:

NCK Dongle


Follow us on twitter:

https://twitter.com/NCKTeam

& on Face Book

https://www.facebook.com/nckteamproducts

Best Regards

NCK Team

How To Update Samsung Galaxy S i9003 To Gingerbread 2.3.4 XXKP9

How To Update Samsung Galaxy S i9003 To Gingerbread 2.3.4 XXKP9




Firmware Version: I9003XXKP9 Android 2.3.4 Gingerbread
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md 5
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5
Download firmware
Password is: ****************
1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
4. Boot your Samsung Galaxy I9003 into Download Mode by pressing the Volume down + OK button, then hold Power button. Thenconnect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.
5. Hit the ”START” Button to begin flashing the PIT file.
[IMG]http://techtete.files.wordpress.com/2011/08/i9003odinflashing2-3-4gingerbreadxxkp9.jpg?w=320*h=228[/IMG]

6. Once finish flashing the PIT file, on ODIN click the “RESET” button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.
Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
Click PDA button and select this file:
CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
Click PHONE button and select this file:
MODEM_I9003XXKP7_REV_00_CL1021949.tar
Click CSC button and select this file:
GT-I9003-CSC-MULTI-OXAKP7.tar
Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit “START” button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will see a word “PASS” on ODIN window when it successfully completes.[IMG]http://techtete.files.wordpress.com/2011/08/i9003odinflashing2-3-4xxkp9gingerbread2.jpg?w=320*h=228[/IMG]
Then do a Factory reset procedure once the phone reboots..You may then confirm and check your newly installed firmware through your About Phone Settings.

Solution To iPhone 4/3GS/3G Stuck on Apple Logo

This might happen while you trying to JailBreak then something went wrong, and you end up with a iPhone which had nothing but Apple Logo in it. And you can’t do any thing with it. You can’t turn it off completely or restart or even no response while you connect it to PC/Mac and no response from iTune too.

Here I will explain solution to this problem and details about DFU and Recovery Mode.


Best solution will be, put your iPhone into DFU Mode(Device Firmware Update mode). Then restore firmware via iTune. Putting iPhone into DFU mode might be pain in ***, but it not so tough just follow the process few times if you can’t reach in DFU. Here to remember DFU mode and recovery mode is different. DFU is good for Firmware update.

Recovery Mode : Recovery Mode is a state of iBoot used during standard upgrades and restores. As iBoot is active, it does not allow you to downgrade your device’s software. Also, unless it is ‘pwned,’ it will not allow custom firmware to be flashed.

DFU Mode : DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot. The screen will appear totally black in DFU mode, so you can’t guess whether the device is in DFU or powered down from simply looking at the screen. Because iBoot and the OS are not loaded this exploit makes us able to downgrade your iPhone firmware or upgrade with a custom firmware created by Pwnage tool.

How to Put Your iPhone in DFU mode

1. Connect your iPhone via USB with PC.

2. Shut it down but keep connected.

3. Press Power Button for 2 sec.

4. Without releasing power button hold Home button too(use another hand may be) Keep both button pressed for 10sec(exactly).

5. Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.

6. A few seconds later iTunes should detect your iPhone.

7. If the Restore Logo is present on the screen, you are in Recovery Mode, not DFU.

How to put your iPhone in recovery mode :

1. Turn the device completely off and disconnect it from cable/dock.
2. Hold down the home button.
3. While holding down the home button connect to a computer with a cable (easiest) or dock.
4. Keep holding down the home button until you see a connect-to-itunes screen You are now in recovery mode.

Doing both will solve create a oppurtunity to solve that iTune Logo stuck situation.

Thanks for reading this guide i hope it helps you guys. Please comment below about your experience.

New Version For Motorola RSD Muliti Flasher And MotorolaV5.9Mobile V5.9 driver software

New Version For Motorola RSD Muliti Flasher And MotorolaV5.9Mobile V5.9 driver software!Enjoy It




RSDLite 6.0

https://hotfile.com/dl/174582400/60a...e_6.0.rar.html

MTK Patch20 （RSD Lite 6.0)

https://hotfile.com/dl/174581768/b23..._6.0).rar.html

MotorolaV5.9Mobile V5.9 driver software

https://hotfile.com/dl/174582754/e08...tware.rar.html




install RSD Lite 6.0 + MTK Patch 20 then install RSD Lite 6.1.4.

Link:

RSDLite 6.1.4:
RSDLite6.1.4.rar

Drivers:
Motorola_End_User_Driver_Installation_5.9.0.rar