Unlocking the bootloader

His translation is unlocking the boot loader and I have explained in another post it means.

The open developer community is important to Sony, so they have made it possible to unlock the boot loader for the launch of Xperia ™ certain devices from 2011 onwards. To find out which models are compatible with this service, please see the Supported Phones page to the left.

Please note that void the warranty of your device and / or any warranty from your operator if you unlock the bootloader. See warranty statement for your device for more information. In addition, due to the modification of device software, the Sony network repair is likely to have to replace key components before testing properly, repair and verify the device using our tools and software repair. Consequently, if Sony makes a warranty repair, Sony will probably be charged a service fee significant additional costs caused by the modification of the software.

Some of the contents of your device also may be inaccessible due to the elimination of DRM and security key user data partition safe to unlock the bootloader. We advise you to create backups as user data, settings and accounts are deleted. For Xperia ™ devices published 2013 or later (for example Xperia ™ Xperia ™ Z and ZL), the SD card from your device will be formatted and you will lose all content (eg, photos, music, videos) to unlock the manager boot.

If you are fully aware of the risks involved, and have a thorough knowledge about these technologies, go to bootloader unlocking instructions page. You should be aware that unlocking the bootloader will not give root access. The only way to get root access is a flash custom ROM with root access.

Instructions

First, you should confirm that it is possible to unlock the boot loader of your phone by dialing the service menu. On your phone, open the dialer and enter * # * # 7378423 # * # * to access the service menu.

1. On the phone, press Info Service> Configuration> Rooting Status. If Bootloader unlock allowed says Yes, then you can proceed to the next step. If you say no, or if the state is not present, the device can not be unlocked.

2. On the computer, click Continue at the bottom of this page to start the boot loader unlocking process.

3. Read the information in the popup and click Yes, I'm sure, if you're still sure you want to unlock the bootloader.

4. Read and accept the legal terms. Click I accept.

5. Enter your name, a valid email address and the first 14 digits of the IMEI or MEID number (clear the last digit if necessary). Click Submit. You can view the IMEI or MEID number by entering * # 06 # on your phone.

6. The boot boot loader unlock key will be sent to your email. Save it for later use.

7. Download and install the latest version of Android SDK developer.android.com.

8. Download and unzip the file. This is the standard android_winusb.inf-file with a few lines of code added to enable Fastboot to support Sony and Sony Ericsson. Make sure you are running Google USB Driver package version 4 or higher on your Android SDK. You can see current Google USB Driver package revision in the SDK Manager.

9. Place the unzipped file in the folder USB_Driver, located in the Android SDK> extras> google folder on your computer. OK to replace the old android_winusb.inf-file with the new file. If you can not find the folder USB_Driver, install the Google USB Driver Packager using the Android SDK Manager.

10. Turn off the phone.

11. On your phone, press and hold the Fastboot button while connecting the phone to the computer with a USB cable. Fastboot button may differ between different phone models. See page Fastboot button for more information on using the button on your phone.

12. On the computer, you are prompted to drivers. Select the folder where you placed the USB_Driver android_winusb.inf-file, and select the Android Bootloader Interface-file.

13. Open a command window and navigate to the folder in the Android SDK tools.

14. Enter fastboot.exe-i 0x0fce getvar version, and verify that you get a response back (eg "0.3"). This means that your phone is connected properly.

15. Warning! If you perform this step jumps to the boot loader. This may void the warranty and / or any warranty from your operator. If you still want to unlock the boot loader of your phone, enter fastboot.exe-i 0x0fce oem unlock 0xKEY, where key is the key to unlocking bootloader you have at the beginning of this instruction. The boot loader should now be successfully unlocked.

Now begin to unlock the boot loader of your phone. This way you can void the phone's warranty. Sony can not guarantee full functionality of your phone, and will not be responsible for any malfunction of the phone, or property damage or personal injury caused by the phone.

Are you sure you want to continue?
Create bootloader unlock key request
To create an application, enter your name, IMEI (or MEID) and a valid email address.
You will then get the boot loader unlock key by email. You can view the IMEI (or MEID) number by entering * # 06 # on your phone.

Clic here to enter your details and get the unlock code:
Are you really sure? | Sony Xperia

Please note! It will only be possible to unlock the boot loader for the launch of some of the following models of phones.

Sony Ericsson Xperia™ PLAY
Sony Ericsson Xperia™ arc
Sony Ericsson Xperia™ arc S
Sony Ericsson Xperia™ neo
Sony Ericsson Xperia™ neo V
Sony Ericsson Xperia™ pro
Sony Ericsson Xperia™ mini
Sony Ericsson Xperia™ mini pro
Sony Ericsson Xperia™ ray
Sony Ericsson Xperia™ active
Sony Ericsson Live with Walkman™
Sony Xperia™ S
Sony Xperia™ P
Sony Xperia™ go
Sony Xperia™ U
Sony Xperia™ sola
Sony Xperia™ acro S
Sony Xperia™ ion
Sony Xperia™ miro
Sony Xperia™ tipo
Sony Xperia™ tipo dual
Sony Xperia™ V
Sony Xperia™ J
Sony Xperia™ T
Sony Xperia™ TX
Sony Xperia™ E
Sony Xperia™ E dual
Sony Xperia™ ZL
Sony Xperia™ Z

BlackBerry Codes Calculator. My version

As it is public now, this is my version of the code calculator for BlackBerrys.



PRD support will be added based on my free time it only supports now 3 PRD as test.

Download from HEREBlackBerry Codes Calculator. My version

Download Samsung Kies3

Kies3


* Supported model : Smart Phone/Tablet from Galaxy Note III
(Android OS 4.3 or over)
Download

backup all data from [nokia,blackberry and iphone] to put your any samsung android de

backup all data from [nokia,blackberry and iphone] to put your any samsung android device




Download Samsung Smart Switch
from here:here

SigmaKey! By Smart-Clip! Updates Here

Dear customers!

The best gift for smart unlockers this season – SigmaKey! New product from developers of legendary Smart-Clip service tool.

Be among the first to BENEFIT from:
  • Universal multibrand and multifunctional MTK unlock solution, not tied to a specific model
  • Fast and secure unlock and user code reading, without losing any user data
  • Repair IMEI, including models with more than one SIM
  • Powerful flashing tool with huge flash files archive (all operator customizations and language packs)
  • Support for the latest operating systems – Windows 7, including 64-bit systems.
  • With SigmaKey you get 1 year access to Boot-Loader v2.0 flash files archive for free, detailed step-by-step manuals and video tutorials, professional customer support and 6 months of warranty.You can check full list of all supported brands and phone models by following this link.For detailed information on the SigmaKey project check official web site.

Smart Phone G9i Pattern Unlock Done [GsmAladynKey]

Smart Phone G9i Pattern Unlock Done [GsmAladynKey]
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:5,
Signal Pin:1, 2, 3, 4,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:3 D-:2
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM222
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:000098BC
Flash Size:20000000->512M
Flash Name:NAND_TOSHIBATYBC0A111236KC10
CPU Name:6820/8810
>>> Auto Formatting ...
Format_RuntimeNV...Fail.
Format_Cache...Fail.
Format_Misc...Fail.
Format_UserData...Success.
All Done...

Samsung M2 Based in Spreadtrum Android CPU!! Successfull Gmail Account remove

>>> USB Pinfind No need Hold Mobile Power key...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM4
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:00002CBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungMT29C4G48MAZAPAKD
CPU Name:6820/8810
All Done...
>>> USB Pinfind No need Hold Mobile Power key...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM4
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:00002CBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungMT29C4G48MAZAPAKD
CPU Name:6820/8810
>>> Auto Formatting ...
Format_RuntimeNV...Fail.
Format_Cache...Fail.
Format_Misc...Fail.
Format_UserData...Success.
All Done...

Miracle GSM Cocktail - HTC Android Tool 1.8.1 (HTC DIRECT UNLOCK) DISCUSSION

Samsung N7100 Copy [Format Successfull]

>>> USB Pinfind No need Hold Mobile Power key...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM55
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:00002CBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungMT29C4G48MAZAPAKD
CPU Name:6820/8810
>>> Auto Formatting ...
Format_RuntimeNV...Fail.
Format_Cache...Fail.
Format_Misc...Fail.
Format_UserData...Success.
All Done...

Samsung t369 unlock done

hi
t369 gave me much headache ......i tried with z3x/nspro/sgtool/modosa...all gave me error....now i was going to back it to customer ...then i tried with hwk and it is done.....now i am dancing with joy

Software: T369UVJF4
Hardware: T369
Regions : T-Mobile - USA
Language: en,es,fr
Release : 2010 June Rev: 4
MSL Active
S/N : R9XZ643524
IMEI: 351908-04-083902-8
BTID: BE53A:B20A45
MSL Active
SIMLOCK STATUS: 0001
MCC-MNC: 001-010 GSM Test Equipment
MASTER KEY: 53492910
NET 56626640, 00000000
SUB 00000000, 00000000
SP 00000000, 00000000
CP 00000000, 00000000
SIM 00000000, 00000000
ACT 00000000, 00000000
PLK <BADSET>, 00000000
Unlock KeyString:
#SIMLOCK*NET*56626640#

MSL Active
MSL Active
SIMLOCK STATUS: 0000
MCC-MNC: 001-010 GSM Test Equipment
MASTER KEY: 53492910
NET 56626640, 00000000
SUB 00000000, 00000000
SP 00000000, 00000000
CP 00000000, 00000000
SIM 00000000, 00000000
ACT 00000000, 00000000
PLK <BADSET>, 00000000
SLOCK Reset, Ok
Unlock Done

Samsung S3850 [Based In Spreadtrum CPU Phone] Gmail Account Remove

>>> USB Pinfind No need Hold Mobile Power key...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM162
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:000098BC
Flash Size:20000000->512M
Flash Name:NAND_TOSHIBATYBC0A111236KC10
CPU Name:6820/8810
>>> Auto Formatting ...
Format_RuntimeNV...Fail.
Format_Cache...Fail.
Format_Misc...Fail.
Format_UserData...Success.
All Done...

Sony Xperia J ST26 one click Sroot Successfully in 18 sec

Sony Xperia J ST26 one click Sroot Successfully in 18 sec



Quote:
Operation : SROOT
Model : ST26_Xperia J
--------------------------------------------------------------------------
With Turned on Phone Goto 'Settings > Developer Options'
Turn on Developer Option And Check 'Usb Debugging' then
Goto 'Settings > Security' and Check 'Unknown Source' and
After That Connect USB Cable to Phone
-----------------------------------------------------------------
Prepairing ...OK
Device Found!
Root Procedure Started!
Prepairing ROOTFILE1 ... OK
Prepairing ROOTFILE2 ... OK
Prepairing ROOTFILE3 ... OK
Prepairing ROOTFILE4 ... OK
Prepairing ROOTFILE5 ... OK
Prepairing ROOTFILE6 ... OK
Setting Permission... OK
Running Exploit... OK
Finalizing... OK
Rebooting ... OK
Root Procedure Finished!
Operation Completed
Operation Time: 00:00:18
Attached Thumbnails
Click image for larger version

Name: 8-6-2013 4-30-19 AM.png
Views: 150
Size: 73.7 KB
ID: 311431

Samsung S5260 update success without box

S5260 how to remove user Lock
S5260 How to hard reset
S5260 update done
S5260 after flash lcd fault
S5260 after flash Lcd Problem
S5260 Working firmware
1.need good firmware download it from here

Hotfile.com: One click file hosting: S5260NVKD1.rar
2.downloader v5.67

multiloader v5.67 - Download - 4shared

3.5130c usb cable

4.follow it
Run Samsung S5260 Star II Downloader.
Check BRCM2133 option.
In case you want to flash Boot files to your phone check Full Download option.
Click Boot button and show the program the Boot files folder.
Click Apps button and select this file: apps_compressed.bin
Click Rsrc1 button and select this file: Rsrc_S5260_Open_Europe_Common.rc1
Click Rsrc2 button and select this file: Rsrc2_S5260(Low).rc2
Click Factory FS button and select this file: FactoryFs_S5260_Open_Europe_Common.ffs
Click CSC button and select this file: CSC_S5260_Open_Europe_Common_xxx.csc
Click SHP APP button and select this file: ShpApp.app
Put the phone into download mode: Press Hold key + Volume up key + Send key
Connect USB cable to phone and click Port Search button.
When the program detect the Com number that the phone takes click Download button to start the process.
Do not touch the phone or cable till all is done and the phone restart.
After reboot the phone you can do full reset by this Code: *2767*3855#.


here the picture

must use boot file if u face lcd problem.otherwise no need



after a long search i able to fix my problem.so share it with all hope everyone be happy


no need to tell old.i know about that.

there nothing i create just gain from google

Samsung Galaxy Ace S5830I One Click [IMEI Repair]!!! Done with Smartsam Box

Samsung Galaxy Ace S5830I One Click [IMEI Repair]!!! Done with Smartsam Box

Volcano box latest drivers

Download and install volcano box latest drivers
for all window ,xp,vista,7,8


PL2303_Prolific_DriverInstaller_v1_9_0 by sweet4hamza

Samsung SC-06D (Galaxy S3 Japan) successfully unlock whit z3x box

SC-06D (Galaxy S3 Japan) successfully unlock whit z3x box

Dial window press *#7284# select (MODEM)
Dial window again press *#9090# select (UART) now reboot phone.

- Open Z3X Samsung Tool 16.0

- Choose correct model = SC-06D

- Choose Z3X COM Pot

- Connect (UART S7070) cable RJ45 to Phone


tham Press "Unlock" - Enjoy.

Selected model: SC06D
Selected port: COM28 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Build: M8960A-AAAANAZM-1.0.062009
Reading security... OK
Calculating... OK
Writing security... OK
Reseting...
Unlock done
Done with Samsung Tool v.16.0

thakss z3x box


Samsung S5360 Original Root and Gmail Done by Worlds best box Volcano

Samsung S5360 Original Root and Gmail Done by Worlds best box Volcano
Here is the Root and Gmail Reset pics




All Gsm Solution Headline Animator

Followers