How To Update Samsung Galaxy S i9003 To Gingerbread 2.3.4 XXKP9
Firmware Version: I9003XXKP9 Android 2.3.4 Gingerbread
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md 5
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5
Download firmware
Password is: ****************
1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
4. Boot your Samsung Galaxy I9003 into Download Mode by pressing the Volume down + OK button, then hold Power button. Thenconnect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.
5. Hit the ”START” Button to begin flashing the PIT file.
[IMG]http://techtete.files.wordpress.com/2011/08/i9003odinflashing2-3-4gingerbreadxxkp9.jpg?w=320*h=228[/IMG]
6. Once finish flashing the PIT file, on ODIN click the “RESET” button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.
Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
Click PDA button and select this file:
CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
Click PHONE button and select this file:
MODEM_I9003XXKP7_REV_00_CL1021949.tar
Click CSC button and select this file:
GT-I9003-CSC-MULTI-OXAKP7.tar
Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit “START” button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will see a word “PASS” on ODIN window when it successfully completes.[IMG]http://techtete.files.wordpress.com/2011/08/i9003odinflashing2-3-4xxkp9gingerbread2.jpg?w=320*h=228[/IMG]
Then do a Factory reset procedure once the phone reboots..You may then confirm and check your newly installed firmware through your About Phone Settings.
Firmware Version: I9003XXKP9 Android 2.3.4 Gingerbread
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md 5
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5
Download firmware
Password is: ****************
1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
4. Boot your Samsung Galaxy I9003 into Download Mode by pressing the Volume down + OK button, then hold Power button. Thenconnect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.
5. Hit the ”START” Button to begin flashing the PIT file.
[IMG]http://techtete.files.wordpress.com/2011/08/i9003odinflashing2-3-4gingerbreadxxkp9.jpg?w=320*h=228[/IMG]
6. Once finish flashing the PIT file, on ODIN click the “RESET” button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.
Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
Click PDA button and select this file:
CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
Click PHONE button and select this file:
MODEM_I9003XXKP7_REV_00_CL1021949.tar
Click CSC button and select this file:
GT-I9003-CSC-MULTI-OXAKP7.tar
Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit “START” button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will see a word “PASS” on ODIN window when it successfully completes.[IMG]http://techtete.files.wordpress.com/2011/08/i9003odinflashing2-3-4xxkp9gingerbread2.jpg?w=320*h=228[/IMG]
Then do a Factory reset procedure once the phone reboots..You may then confirm and check your newly installed firmware through your About Phone Settings.
No comments:
Post a Comment
Hello All Lovely User i am Here Any Kind Solution Need Just Comment Me i Try to Solved Of Your Problem Early Tnx To Visit My Blog